- 电压击穿试验仪
- 介电常数
- 电阻率测试仪
- 粉末电阻率测试仪
- 导体、半导体电阻率
- 耐电弧测试仪
- 漏电起痕试验仪
- 落球回弹试验仪,介电击穿强度测定仪:电池隔膜电弱点测试仪
- 橡胶塑料检测仪器
- 力学性能检测仪器
- 落球回弹试验仪,介电击穿强度测定仪:海绵泡沫材料检测仪器
- 落球回弹试验仪,介电击穿强度测定仪:受电弓/碳滑板检测仪器
- 材料热物理性能实验设备
- 热物性检测仪器
-
粉末测试设备
-
霍尔流速计
-
真密度测试仪
-
斯柯特容量计
-
休止角测定仪
-
粉末压实密度仪
-
振实密度测试仪
-
颗粒图像分析仪
-
全自动真密度仪
-
塑料流动性测定仪
-
粉尘安息角测试仪
-
落球回弹试验仪,介电击穿强度测定仪:多功能压力测量系统
-
落球回弹试验仪,介电击穿强度测定仪:粉末自然堆积密度仪
-
落球回弹试验仪,介电击穿强度测定仪:粉体综合物性测试仪
-
氧化铝流动角测定仪
-
落球回弹试验仪,介电击穿强度测定仪:塑料表观密度测试仪
-
落球回弹试验仪,介电击穿强度测定仪:普通磨料堆积密度仪
-
白土堆积密度测定仪
-
落球回弹试验仪,介电击穿强度测定仪:氧化铝流动时间测定仪
-
压实密度粉末电阻率仪
-
陶粒砂体积密度测定仪
-
落球回弹试验仪,介电击穿强度测定仪:氧化铝松装密度测定仪
-
表面活性剂表观密度仪
-
自由流动堆积密度测定仪
-
超硬材料堆积密度测定仪
-
霍尔流速计
- 比表面测试仪
- 电池检测
- 燃烧性能试验机
- 金属检测仪器
-
焙烧炉试验机
ASTMD495耐高压低电流电弧放电试验机
高端电压小功率可靠性试验检测仪(耐电弧焊接可靠性试验检测仪)-(来计算机程序控制)
High voltage low current tester (arc resistance tester) - (computer control)
产品的命名:耐电弧试验机
Product name: electric arc resistance tester
物品类型:NDH-A
Product model: NDH - A
需要满足标准单位:GB/T 1411-2002《胶体绝缘带文件耐高放低直流电压电弧焊接释放电能的可靠性试验》(就是指IEC 61621-1997)及ASTM D495等标准单位的必须来设计研发的,并达到IEC 149、UL
Meet the standards: GB/T 1411-1411 "solid insulating material resistant to high voltage low current arc discharge test" (equivalent to IEC 61621-1997) and the requirements of standards such as ASTM D495 design and manufacturing, and conform to the IEC 149, UL 746 a test method, etc
一 概述
一An overview of the
大部分适合范畴及工作:
本测式机是依照规定落球回弹试验仪,介电击穿强度测定仪于伺服电机、物品和水取暖器物品等领域的电工作业用泡沫塑料材质、不饱和树酯胶和隔热带漆等隔热带涂料的耐电孤效果认定,主于固体颗粒隔热带涂料如:泡沫塑料材质、塑料膜、不饱和树酯、白云母、瓷质、窗玻璃、隔热带油、隔热带漆、纸壳等媒介的耐电孤效果测式;
本试验装置机由计算方法机把控好自动运行,可能信息显示某个试验状态下及试验时,试验尾声后并存有某个试验数值,并可复印.准则实验室报告范文。
Main scope of application and features:
This machine is in accordance with the applied in motor, electrical appliances and household appliances and other industries with varnish insulation materials such as plastic, resin adhesive and the arc resistance evaluation, the main used for solid insulating material such as plastic, film, resin, mica, ceramic, glass, insulating oil, insulating paint, such as cardboard medium arc resistance test;
This testing machine controlled by computer operation, can display the current experimental condition and experimental time, after the experiment, and save the current experimental data and can be printed. Standard experiment report
二 功能特点
1 远程服务器为上上下下一身型式,下方为实操控制系统,上方为实验箱。
2 本类产品利用*新智慧调节技巧,完成考虑软件(IEC或ASTM)可自主使用耐压,并在我的电脑软件展示试验装置时和结论。
3 **性能指标好的,抗要素工作能力强,检验的精密度不高。
二:Functional features:
1 this machine is up and down a body structure, lower for the operating system, the upper part of test cases.
2 this product USES the latest intelligent control technology, through the selection process (IEC) or ASTM test can be automatically, and displayed on the computer and the test process and results.
3 good safety performance, strong anti-interference ability, high test precision.
三 主要技术参数
1 电弧放电通断准确时间不确定度:低于 ±10ms
2 调压器存储容量:2kVA
3 稳定耐压电流:12.5kV
4 检验线电压精准度:±3%
5 直流电压掌控计算精度:±10% 功率检测的的精密度:1.5%
6 电极片对试板压强:(0.5±0.05)N
7 工业原材料:钨棒
8 探针空距:(6.35±0.1)mm(IEC)
(6.0±0.1)mm(ASTM)
9 的使用条件溫度:(23±2)℃
10 用自然环境相对湿度:(50±5)%
11 电源适配器:220V±5% 50Hz
12 检验 措施: 新国标/美标/10 mA 连续不断/20 mA 连续不断/30 mA间断性/40 mA间隔
13 试验报告程度相应:
| 步骤段 | 脉冲电流大小 mA | 脉冲通断时期s | 各流程段维持事件s | 耐压总的时间s | |
| | | IEC 61621 | ASTM D495 | | |
| 1 | 10 | 1/8s通 7/8s断 | 1/4s通 7/4s断 | 60 | 60 |
| 2 | 10 | 1/4s通 3/4s断 | 1/4s通 3/4s断 | 60 | 120 |
| 3 | 10 | 1/4s通 1/4s断 | 1/4s通 1/4s断 | 60 | 180 |
| 4 | 10 | 连着通 | 60 | 240 | |
| 5 | 20 | 不断通 | 60 | 300 | |
| 6 | 30 | 持续通 | 60 | 360 | |
| 7 | 40 | 重复通 | 60 | 420 | |
Three main technical parameters:
Error: 1 arc on-off time less than plus or minus 10 ms
Transformer capacity: 2 kva
3 test voltage rating: 12.5 kV
4: test voltage accuracy + / - 3%
5 current control accuracy: plus or minus 10% current measuring accuracy: 1.5%
6 electrode pressure on sample: (0.5 + 0.5) N
7 electrode materials: tungsten rods
8 electrode distance: 6.35 + / - 0.1 mm (6.0 + 0.1) mm (IEC) (ASTM)
9 using the environment temperature (23 + 2) ℃
10 use environment humidity: (50 + 5) %
Power supply: 220 v + 5% for 50 hz 10 a
Test method: beautiful mark / 10 gb / 30 mA mA continuous / 20 mA continuous/continuous / 40 mA continuous
13 test procedure is as follows:
Procedures section of the arc current
MA arc on-off time s the program s test total duration time s
IEC 61621 ASTM D495
1 1/8 10 s on 7/8 s broken 1/4 7/4 break 60 s 60 s
2 10 1/4 "s pass 3/4 s 1/4 3/4 break 60 s 120 s
3 to 10 1/4 "s make a quarter s break a quarter of a quarter break 60 s 180 s
4 consecutive 10 to 60, 240
5 20 consecutive 60, 300
30 consecutive 6 to 60, 360
7 consecutive 40 to 60, 420
四 配置
| 项目编号 | 名号 | 使用量 | 提示 |
| 01 | 耐电弧焊接自测仪 | 两台 | |
| 02 | 探针装置 | 整套 | |
| 03 | 电级网架支座 | 1套 | |
| 04 | 电压电揽 | 一个 | |
| 05 | 保护接地放** | 一个 | |
| 06 | 直流电压毫安表 | 这台 | |
| 07 | 笔记本电脑测控软文 | 一种 | |
| 08 | 钢材拉伸试验架 | 一个 | |
| 09 | 金属电极范围标准单位块 | 2块 | |
| 10 | 的视角标准规范块 | 2块 | |
| 11 | 陶瓷制品片 | 2片 | |
| 12 | 喷墨彩打机 | 1台 | 该品牌 |
| 13 | 算起机 | 1台 | 产品 |
| 14 | 在使用讲解书 | 1份 | |
| 15 | 合格品证 | 1份 | |
Four configuration:
Serial number name number note
01 arc resistance tester
02 a electrode system
03 electrode bearing a set
04 a set of power cable
05 ground put a rod
06 milliammeter current one
7 a set of computer measurement and control software
08 specimen holder a
09 electrode distance standard 2 blocks
Standard 2 blocks of 10 Angle
11 ceramic pieces 2 pieces
12 one brand inkjet printer
13 1 computer brand
14 1 instruction manual
15 1 certificate
五 食品尺寸:
NDH-A 耐弧光试验台仪-微机有效控制
NDH-B 耐电孤测试仪-触模屏把握
Five product model:
NDH - A arc resistance tester - microcomputer control
NDH - B arc resistance tester - touch screen control
ASTMD495耐高压低电流电弧放电试验机详情可以随时来电咨询!